RIPPER STRIPPER FLOOR STRIPPING SOLUTION – 15 Liters

DESCRIPTION

RIPPER STRIPPER is a concentrated floor stripping solution with a solvent base which will quickly and effectively remove acrylic, polymer type floor sealers, wax and polish from vinyl, lino, rubber terrazzo, slate quarry and unglazed ceramic tile.

• RIPPER STRIPPER can also be used to remove the old sealer finish without using a scrubbing machine, pads or brushes.
• RIPPER STRIPPER contains a dye so that it can be seen on the floor during the stripping process.Â
• RIPPER STRIPPER is free rinsing and has a pleasant sweet fragrance and contains no ammonia or caustics.

APPLICATION

FLOOR STRIPPING

Apply RIPPER STRIPPER diluted with up to 10 parts cold water. The dilution rate will vary dependant upon the amount of build up. Apply liberally with a mop. Allow at least 10-15 minutes contact time. Work systematically in areas no larger than 10sq metres. After contact time has elapsed, scrub with a machine using brush, brown or black stripping pad or a high productivity pad for heavily built up areas.

Pick up slurry using a mop or a wet and dry vacuum cleaner. Rinse and allow to dry.

FLOOR SCRUBBING BACK

Apply RIPPER STRIPPER diluted with from 10 parts to 30 parts cold water and scrub back using a machine fitted with a brush or blue or green scrubbing pad. Apply solution liberally and scrub until the surface and embedded dirt is removed. Pick up slurry, rinse and allow to dry.

NO SCRUB/NO RINSE

Apply RIPPER STRIPPER to the floor neat or with up to 4 parts cold water. Allow 10-15 minutes contact time and agitate the solution using the mop. Work systematically in small areas and pick up the slurry making sure none is left behind and allow the area to dry.

Do not let the slurry dry out. If necessary wet with water to keep from drying.

Usage Rate Approximately 10 Square Metres per Litre

WARNING

Avoid skin and eye contact and inhaling vapours.

FIRST AID

If poisoning occurs contact a doctor of Poisons Information Centre. PH 13 11 26.  If swallowed do not induce vomiting, give a glass of water and seek medical attention. For inhalation, remove patient to fresh air, lay down and rest and seek urgent medical attention. If skin contact does occur remove contaminated clothing and wash thoroughly with water. For eye contact, irrigate with water for 15 minutes. If irritation persists seek medical advice.

PACKAGING

RIPPER STRIPPER is available in 15 litre containers.